FEATURES:

1. The Core was made from high quality Aluminum.  Effective Heat Dissipation.

2. Good sealing.  All of the new radiators will be inspected before selling (including 100% leaking test).

3. Radiator is really easy to get damaged during delivery. We have upgraded our package design to avoid this kind of problem.

There are 2 types of installation method of the Fast connector:

1. Remove the original mount, insert the tube, and tighten the nut at the tip of tube. 

2. The nut at the end of the tube is not needed, move it away from the tip. Next, insert the tube to the mount and push it to the bottom. The snap spring on the mount will keep the tube intact.

Note:

1. The radiator cap that has not passed the test can’t release the pressure when it reaches the pressure value.
2. The damaged thermostat is unable to carry out a large cycle, resulting in a continuous increase in the radiator pressure.
3. The radiator fan does not turn, resulting in high temperature in the water tank.
4. Drain the air from the cooling system. Refer to the user manual or repair manual.
5. Please refer to owner's manual to add coolant.
6. Do not open the hood until the steam has subsided. The engine compartment may be very hot, causing serious injuries such as burns.
7. Please stop the vehicle immediately, when “ENGINE OVERHEAT/High Temperature” shows on the dashboard or steam comes out from under the hood.
8. Keep hands and clothing (especially a tie, a scarf) away from the fans and belts. Failure to do so may cause the hands or clothing to be caught, resulting in serious injuries.
9. Do not loosen the radiator cap while the engine and radiator are hot. Serious injuries, such as burns, may result from hot coolant and steam released under pressure.